Why Is My RELX Pod Leaking or Spitting E-Liquid?
Introduction
You pick up your device for a normal draw and something is off. Maybe there is liquid pooling around the mouthpiece. Maybe you just got a burst of hot e-liquid in your mouth instead of vapor. Both are common RELX pod problems, and they are not always the same issue. This guide walks through the exact cause behind each one, how to fix it, and how to stop it from happening again.
Quick Answer
RELX pods usually leak because of heat exposure, pressure changes, hard draws, sideways storage, or damaged seals. Spitback usually happens when excess e-liquid floods the coil, most often from drawing too hard or too fast.
Quick Diagnosis: Is It Leaking, Spitback, or Just Condensation?
Before doing anything, work out which of the three you are actually dealing with. They look similar but need different fixes.
Signs it is a leak
Liquid appears on the outside of the pod, around the base, or on the device body itself. It is usually colored and has a strong flavor smell.
Signs it is spitback
You get a small amount of hot liquid directly in your mouth mid-draw, sometimes with a popping or crackling sound as you inhale.
Signs it is condensation
The liquid is clear, has little to no smell, and only ever shows up near the mouthpiece. This is normal and not a fault.
| Symptom | Likely Cause | Urgency | What To Do |
|---|---|---|---|
| Liquid outside the pod or on the device | Heat, pressure change, or hard draws | Deal with it today | Clean and dry, replace if it continues |
| Liquid in your mouth while drawing | Flooded coil | Fix before next use | Clear excess liquid, adjust draw style |
| Clear liquid only near mouthpiece | Condensation | Not urgent | Wipe and continue as normal |
Why RELX Pods Leak: The, Real Causes
Heat and UAE summer temperatures
High temperatures thin the e-liquid inside the pod, making it easier for it to escape past the seals. Leaving a device in a parked car or on a sunny dashboard is one of the fastest ways to trigger a leak in this climate.
Air pressure changes
Flying or driving through altitude changes puts pressure on a sealed pod. The trapped air expands or contracts and can force liquid out, especially if the pod was already close to full.
Hard or chain draws
Pulling too hard or too often floods the coil faster than it can vaporize the liquid. The excess has to go somewhere, and it usually ends up outside the pod or in the mouthpiece.
Pod stored on its side or upside down
Liquid pools near the coil and mouthpiece when a pod is not stored upright, increasing the chance of both leaking and spitback on the next draw.
Faulty seal or manufacturing defect
Occasionally a pod has a small crack or an imperfect seal from the factory. If leaking happens repeatedly from a specific pack, this is usually the reason.
Overfilled or damaged pod from handling
Dropping a pod or applying pressure during storage can stress the internal seal, even if no crack is visible from the outside.
Why RELX Pods Spit Back E-Liquid
Flooded coil
This is the core cause of spitback. Too much liquid saturates the coil at once, the heating element cannot vaporise all of it, and the excess is forced upward instead.
Aggressive or rapid draws
Fast, forceful pulls draw more liquid into the coil than a normal draw would, overwhelming it in a single go.
Pod sat sideways before use
Liquid that has pooled near the coil from sideways storage is the most common reason spitback happens right after taking a pod out of a drawer or bag.
Worn or degraded coil near end of life
A coil that is close to its usable limit heats unevenly. This uneven heating is a common trigger for spitback in the final stretch of a pod’s life.
New pod not primed before first draw
Drawing immediately after inserting a new pod, before the cotton has absorbed enough liquid, can cause an early spitback along with a burnt or harsh taste.
Step-by-Step Fix: Stop a Leaking Pod
Remove and inspect the pod immediately
Take the pod out as soon as you notice leaking and check whether the liquid is coming from the base, the seam, or the airflow holes.
Clean the device contacts and cavity
Roll a small piece of tissue into a thin tube and gently rotate it inside the pod cavity to absorb any liquid around the metal contacts.
Air-dry before reinserting
Leave the device open for fifteen to twenty minutes so any residual moisture evaporates before the pod goes back in.
When to replace vs reuse the pod
If the leak was a one-off from heat or pressure, cleaning and drying is usually enough. If the same pod keeps leaking after drying, replace it rather than reinserting it.
Step-by-Step Fix: Stop Spitback in Your Mouth
The flick-and-clear method
Cover the mouthpiece with a finger and flick the pod downward a few times. This moves pooled liquid away from the coil before your next draw.
Mouthpiece drying technique
Insert a thin rolled piece of tissue into the mouthpiece to soak up any liquid that has collected there.
Draw technique adjustment
Switch to slow, steady pulls instead of fast or forceful ones. This single change resolves most recurring spitback issues.
When spitback means the pod is done
If gentle draws and clearing the mouthpiece do not help, the coil is likely flooded beyond recovery and the pod should be replaced.
RELX Device Notes
The core causes above apply across the RELX device lineup, but a few devicesearly spitback and, a pod has a small crack or an imperfect factory seal, have quirks worth knowing.
RELX Infinity pod leaking
The original Infinity uses a side-fill seal design that is more sensitive to sideways storage than newer models, so upright storage matters more here.
RELX Infinity 2 pod leaking and spit back
The Infinity 2 lineup uses an updated pod connection that reduces leaking from loose seating, though heat and hard draws still cause the same issues as any closed pod system.
If you are weighing whether to stick with this device after a pod issue, the Infinity 2 review covers battery life and build quality in more depth.
RELX Artisan pod leaking
The Artisan’s compact body means less airflow around the pod cavity, so drying time after a leak should run a little longer than usual.
For the full picture of how this device is built, the detailed Artisan breakdown covers the design beyond just this issue.
RELX Infinity Plus pod leaking and spit back
The Infinity Plus shares the same pod seating mechanism as the Infinity 2, so the same fixes apply. Heat, hard draws, and sideways storage remain the main triggers, and the drying process for a leak is identical to the rest of the lineup.
Prevention: Stop It Happening Again
Storage
Keep devices and spare pods upright, indoors, and away from direct sun. UAE heat is the single biggest driver of both leaking and spitback complaints in this market.
Travel and flight prep
Remove the pod before boarding and store it in a sealed bag. Cabin pressure changes are one of the few leak causes that have nothing to do with how you vape, and fuller pods like the Pod Pro 18mg line are slightly more exposed to this because they ship with more liquid on board.
Draw habits
Slow, even draws with a short pause between them protect the coil from flooding and are the single most effective habit change for both problems.
Priming every new pod
Wait at least sixty seconds after inserting a new pod before the first draw so the coil has time to saturate properly.
Checking pods before use
A quick visual check for cracks or a loose seal before opening a new pod catches most manufacturing defects before they become a mess in your bag or pocket.
Chekout out blog for more info in RELX Pod Pro flavor Perfermance
Why RELX Pod Problems Are Common in UAE Weather
Location matters more than most users realize. A pod that behaves perfectly in a mild climate can leak or spit back far more easily here simply because of the environment it is stored and used in.
Dubai summer temperatures
Ambient heat through most of the year keeps e-liquid thinner than it would be in cooler climates, which makes it flow past seals more easily even with normal handling.
Car storage problems
A parked car in direct sun can reach temperatures far higher than the outside air within minutes. This is one of the single biggest triggers for leaking pods reported across the UAE.
Outdoor heat exposure
Carrying a device outdoors during peak afternoon heat, even briefly, has the same thinning effect on the pod as leaving it in a hot room for hours.
Delivery and storage considerations
Pods shipped or stored in non-climate-controlled conditions before reaching you can already be warmer than ideal by the time they are opened, which is why a pod can arrive slightly more prone to leaking on first use.
Is Your RELX Pod Faulty or Just Flooded?
Not every leak means the pod is bad. Use this to decide whether to fix it or replace it.
| Situation | What It Means |
|---|---|
| Leak from the very first use | Replace the pod, this points to a seal or manufacturing defect |
| Leak after heat exposure | Let it cool to room temperature and retry before assuming it is faulty |
| A small amount of clear liquid near the mouthpiece | Normal condensation, not a defect |
| Repeated leaking across multiple sessions | Likely a faulty seal, replacement is the right call |
Can a Leaking or Spitting Pod Damage Your Device?
A small leak wiped up quickly rarely causes lasting harm. The risk comes when liquid reaches the internal contacts or pressure sensor, which can trigger repeated short-circuit protection or, in rare cases, permanent sensor damage. Treat any leak near the device’s charging port or contacts as urgent and dry it thoroughly before the next use.
Where to Get Genuine Replacement Pods in the UAE
Before replacing your pod, check whether the issue is caused by storage, drawing style, or temperature. A genuine replacement pod should not leak under normal usage, so ruling out habits and environment first saves you from replacing a pod that was never actually the problem.
If a pod is leaking or spitting because of a seal defect rather than usage habits, the fix is simply a fresh one. Genuine replacement Pods from RELX Dubai are the safest way to rule out counterfeit stock, which is a separate and more frequent cause of leaking in the wider gray market.
Frequently Asked Questions
Why is my RELX pod leaking into my mouth?
This is usually spitback from a flooded coil rather than a true leak. Slow your draw speed and clear the mouthpiece before your next puff.
Why does my RELX pod spit juice?
Too much liquid is reaching the coil at once, often from hard draws or a pod that was stored on its side. Gentle, steady draws solve most cases.
How do I stop my RELX pod from leaking?
Store the device upright in a cool spot, avoid chain vaping, and remove the pod before flights. If a specific pod keeps leaking after drying, replace it.
Why is my new RELX pod leaking?
A brand-new pod that leaks right away usually has a seal or manufacturing defect. Swap it for a fresh one rather than trying to fix it.
Why does my RELX pod taste burnt and leak?
A burnt taste alongside leaking often means the coil is near the end of its life and heating unevenly. Replacing the pod resolves both symptoms together.
Why is my RELX pod making a bubbling or gurgling sound?
A gurgling sound means excess liquid has pooled around the coil, which is the same condition that leads to spitback. Clear the mouthpiece and switch to gentler draws.
Can a leaking RELX pod damage the device?
Minor leaks wiped up quickly are unlikely to cause harm. Liquid that reaches the internal contacts or sensor can trigger short-circuit protection or, rarely, permanent damage.
Should I replace a leaking RELX pod?
Yes, if cleaning and drying do not stop the leak within a day of use. A pod that keeps leaking after proper drying almost always has a seal problem that will not resolve on its own.
Conclusion
Leaking and spitback are two different problems with two different fixes, and both usually trace back to the same three things: heat, draw speed, and storage position. A quick check against the diagnosis table at the top of this guide tells you whether you are dealing with a real leak, a flooded coil, or just normal condensation, and the faulty-versus-flooded table further down tells you whether the pod is worth saving or worth replacing.
Get the storage and draw habits right, especially given how much UAE heat plays a role, and most of these issues stop showing up altogether. If a pod keeps causing trouble after trying the fixes above, replacing it with a genuine pod at RELX Pod Pro 2 (3%) is the simplest way to rule out a defect for good.
WARNING: This product contains nicotine. Nicotine is an addictive chemical.
